Analysis |
Method |
Volume |
| Accelerated Fuel Oil Stability |
DUPONT F21 |
50 ml |
| Acid No. by SMC |
ASTM D-3339 |
100 ml |
| Acid Number by Color Indicator |
ASTM D-974 |
50 ml |
| Acidity in Refrigerants by Tritration |
ARI-700 P1 |
1 lb |
| Active Sulfur |
ASTM D-1662 |
100 ml |
| Additives in Oils by ICP |
ASTM D-4951 |
15 ml |
| Analytical Ferrography |
HL-1132 |
10 ml |
| Analytical Ferrography W/DR |
HL-1132 |
10 ml |
| Aniline Point |
ASTM D-611 |
10 ml |
| Anions in Water by I.C. |
ASTM D-4327 |
100 ml |
| Antifreeze Conc. as Glycol |
HL-1169 |
100 ml |
| API Gravity (Hydrometer Method) |
ASTM D-287 |
200 ml |
| Apparent Vis. Of Eng. Oils Between -5C & |
ASTM D-5293 |
20 ml |
| Appearance |
HL-1121 |
100 ml |
| Appearance of Grease |
HL-1145 |
5 g |
| Ash Content |
ASTM D-482 |
100 ml |
| Ash Content of Engine Coolant and Antirusts |
ASTM D-1119 |
50 ml |
| Asphaltenes in Heavy Fuel Oil |
HL-1120 |
10 ml |
| Bacteria Count by "Easycult Combi" |
HL-1150 |
25 ml |
| Base Number (Potentiometric) |
ASTM D-2896 |
10 ml |
| Base Number by Potentiometric Titration |
ASTM D-4739 |
25 ml |
| Basic Nitrogen |
HL-1175 |
50 g |
| Basic Nitrogen by Titration |
UOP-269 |
50 g |
| Bleed & Evaporation of Grease |
HL-0033 |
50 g |
| BTU per Barrel, Gross (Calculated) |
HL-1146 |
200 ml |
| BTU per Lb/Gal/Bbl w/ Sulfur & API |
HL-1146 |
200 ml |
| Cetane Index w/ Distillation & API |
ASTM D-4737 |
200 ml |
| Cetane Index (Calculated) |
ASTM D-4737 |
200 ml |
| Cetane Index (Calculation Only) |
ASTM D-976 |
100 ml |
| Cetane Index (Includes tests) |
ASTM D-976 |
100 ml |
| Chloride by Microcoulometry(solids,grs,wtr) |
HL-1168 |
100 ml |
| Chloride in Refrigerants/Silver Chloride Pr |
ARI-700 P4 |
1 lb |
| Chloride Ion in Water |
ASTM D-512 |
50 ml |
| Chlorides in Lubricants |
HL-1137 |
10 ml |
| Chlorine by Microcoulometry (oil) |
HL-1168 |
100 ml |
| Cloud Point |
ASTM D-2500 |
75 ml |
| Color (Saybolt) |
ASTM D-156 |
75 ml |
| Color ASTM |
ASTM D-1500 |
45 ml |
| Color Scale Conversions (Calc) |
HL-1144 |
Calc |
| Compatibility of Fuel Oil by Spot test |
ASTM D-2781 |
20 ml |
| Conductivity (Av. Hydraulic Fl.) |
HL-1152 |
25 ml |
| Conductivity of Fluids |
HL-1152A |
25 ml |
| Cone Penetration (1/4) Unworked |
ASTM D-1403 |
60 g |
| Cone Penetration (1/4) Worked |
ASTM D-1403 |
60 g |
| Cone Penetration Full Scale (Unworked) |
ASTM D-217 |
1 lb |
| Cone Penetration, Full Scale Worked |
ASTM D-217 |
1 lb |
| Conradson Carbon Residue |
ASTM D-189 |
50 ml |
| Conradson Carbon Residue on 10% Bottoms |
ASTM D189 |
50 ml |
| Contamination by Filtration |
EMD 102 |
1000 ml |
| Contamination by Particle Count |
ARP 598A |
200 ml |
| Contamination by Thin Layer Chromatography |
HL-1195 |
1 ml |
| Contamination of Brake Fluid with Oil |
HL-0015 |
50 ml |
| Coolant (Anti-Freeze) Analysis |
HL-1167 |
25 ml |
| Copper Corrosion by Copper Strip |
ASTM D-130 |
30 ml |
| Corrosion Properties of Grease |
ASTM D-1743 |
500 g |
| D975 No. 2 Diesel w/D976 Cetane (Pkg) |
ASTM D-975 |
1 gal |
| Deleterious Particles in Grease |
ASTM D-1404 |
5 g |
| Density by Digital Density Meter |
ASTM D-4052 |
5 ml |
| Density in Crude by Digital Densiometer |
ASTM D-5002 |
5 ml |
| Density, Relative Density (Specific Gravity |
ASTM D-1298 |
200 ml |
| Dielectric Strength of Insulating Oils |
ASTM D-877 |
300 ml |
| Direct Reading Ferrography |
HL-1131 |
10 ml |
| Distillation of Petroleum Products |
ASTM D-86 |
100 ml |
| Dropping Point |
ASTM D-2265 |
5 g |
| Evaporation of Diluent |
HL-1173 |
100 ml |
| Evaporation Residue |
HL-1194 |
10 g |
| Existent Gum by Evaporation |
ASTM D-381 |
100 ml |
| Ferrous Wear Debris by PQ Index |
HL-1191 |
5 ml |
| Filter Patch Test |
HL-1142 |
100 ml |
| Flash & Fire Point by Cleveland Open Cup |
ASTM D-92 |
75 ml |
| Flash or Fire Point by Cleveland Open Cup |
ASTM D-92 |
75 ml |
| Flash Point by Tag Closed Cup |
ASTM D-56 |
50 ml |
| Flash Point Pensky Martin Closed Tester |
ASTM D-93 |
75 ml |
| Foaming Characteristics |
ASTM D-892 |
500 ml |
| Free Chlorides in Oil |
HL-1186 |
50 ml |
| Freezing Point and Glycol Concentration |
ASTM D-3321 |
50 ml |
| FTIR "Omnic" with Intrepertation |
HL-1141 |
10 ml |
| FTIR Nicolet Impact 410 "Integra" |
HL-1140 |
10 ml |
| FT-IR Nicolet Impact 410 "Omnic"(IR Scan) |
HL-1141 |
10 ml |
| Fuel Dilution in Oils by GC |
ASTM D-3524 |
5 ml |
| Glycol in Petroleum |
ASTM D-2982 |
20 ml |
| Halogen by Ion Chromotography |
HL-1151 |
100 ml |
| Heat of Combustion by Bomb |
ASTM D-240 |
10 ml |
| HIAC Particle Count |
HL-1184 |
100 ml |
| High Boiling Residue&Particulates Refrig. |
ARI-700 P3 |
1 lb |
| High Frequency Reciprocating Test Rig ( Fuel Lubricity) |
ASTM D-6079 |
10ml |
| HMB Biomass Culture Study |
HL-1161 |
25 ml |
| Initial pH (Mod) |
ASTM D-664 |
50 ml |
| Lube Oil Compatibility |
HL-1129 |
50 ml |
| Metal by ICP, Aqueous (Per Element) |
HL-1158 |
10 ml |
| Metal by ICP, Organic (Per Element) |
HL-1158 |
10 ml |
| Metals and Contaminants by ICP |
ASTM D-5185 |
15 ml |
| Metals by ICP AES Organic (24 Elements) |
HL-1158 |
10 ml |
| Metals by ICP, Aqueous (24 Elements) |
HL-1158 |
10 ml |
| Microbial Growth |
HL-1126 |
10 ml |
| Microscopical Sizing/Count on Filters |
ASTM F-312 |
100 ml |
| Microwave Digestion (Preparation) |
HL-1164 |
25 g |
| Mineral Oil Content in EHC Fluid |
HL-1189 |
500 ml |
| Microscope Evaluation of Debris |
HL-1196 |
25 ml |
| Nitrate by Ion Selective Electrode |
HL-1192 |
50 ml |
| NLGI Number, Calculation |
ASTM D-217 |
1 lb |
| Oil Content in Petroleum Waxes |
ASTM D-721 |
25 ml |
| Oil Separation from Greases |
ASTM D-1742 |
125 g |
| TOST Oxidation Characteristics Of Inhibited Mine |
ASTM D-943 |
500 ml |
| Oxidation Stability (RPVOT) |
ASTM D-2272 |
100 ml |
| Oxidation Stability Fuel Oil |
ASTM D-2274 |
500 ml |
| Oxidation Stability of Grease |
ASTM D-942 |
100 g |
| Oxyrane Oxygen by Perchloric Acid |
HL-1157 |
25 ml |
| Particle Contamination by Filter Residue |
HL-1116 |
100 ml |
| Particulate Cont. in Middle Dist. Fuels |
ASTM D-6217 |
1000 ml |
| Particulate Contamination in Av. Fuel |
ASTM D-5452 |
500 ml |
| Particulate Contamination of Grease |
HL-1178 |
5 g |
| Particulates Contamination in Av. Fuel |
ASTM D-2276 |
1000 ml |
| PCB Screen (A), PCB Level (B) |
HL-1147 |
10 ml |
| Penetration 10,000 Strokes |
ASTM D-217 |
1 lb |
| Penetration 100,000 Strokes |
ASTM D-217 |
1 lb |
| Penetration of Petrolatum |
ASTM D-937 |
4 lbs |
| Pentane/Coagulated Insolubles |
ASTM D-893 |
15 ml |
| Percent Moisture of Nonliquid |
HL-1174 |
100 g |
| Percent Soot by TGA, ASTM D5967 Appendix A4 |
HL-1165 |
10 g |
| pH of Engine Coolant |
ASTM D-1287 |
100 ml |
| Phosphate Esters by GC (Av. Hydr. Fl.) |
HL-1154 |
25 ml |
| Pour Point |
ASTM D-97 |
100 ml |
| Precipitation Number of Lube Oils |
ASTM D-91 |
40 ml |
| Purity of Refrigerants by GC |
ARI-700 P6 |
1 lb |
| Ramsbottom Carbon Residue |
ASTM D-524 |
10 ml |
| Ramsbotton Carbon Residue 10% Bottoms |
ASTM D-524 |
10 ml |
| Refractive Index |
ASTM D-1218 |
10 ml |
| Reid Vapor Pressure (Other than 100F) |
ASTM D-323 |
25 ml |
| Reserve Alkalinity of Engine Coolants |
ASTM D-1121 |
20 ml |
| RFS- Rotating Filter Spectroscopy |
HL 1183 |
10 ml |
| RULER Analysis |
HL-1182 |
10 ml |
| Rust Preventative Characteristics 24 hrs. |
ASTM D-665 |
300 ml |
| Rust Preventative Characteristics 48 hrs. |
ASTM D-665 |
300 ml |
| Salt in Crude by Extraction HACH Method |
HACH |
250 ml |
| Sample Preparation by Bomb |
ASTM D-808 |
10 ml |
| Saponification No. of Petroleum Products |
ASTM D-94 |
25 ml |
| Sediment & Water in Fuel by Centrifuge |
ASTM D-1796 |
100 ml |
| Sediment in Crude by Membrane Filtration |
ASTM D-4807 |
15 ml |
| SIMDIS (Simulated Distillation Process) |
HL-1197 |
25 ml |
| Std Classification of Ind.Lubricants Calc |
ASTM 2422-86 |
Calc |
| Sugar Test |
HL-1124 |
100 ml |
| Sulfated Ash of Lube Oils |
ASTM D-874 |
100 ml |
| Sulfide Ion in Water |
ASTM D-4658 |
50 ml |
| Sulfur by Micro. (Mod)(solids, grease,etc.) |
ASTM D-3120 |
100 ml |
| Sulfur by Microcoul. (light liquid petrol.) |
ASTM D-3120 |
100 ml |
| Sulfur By X-Ray Fluorescence |
ASTM D-4294 |
10 ml |
| Thermographic Analysis (TGA) |
HL-1165 |
10 g |
| Toluene/Coagulated Insolubles |
ASTM D-893 |
15 ml |
| Total Abrasives (Inorganic Fines) |
HL-1128 |
100 ml |
| Total Acid Number, ASTM D664 |
ASTM D-664 |
50 ml |
| Total Dissolved Solids in Coolant |
HL-1187 |
50 ml |
| Total Halogens by Ion Chromotography |
HL-1151 |
100 ml |
| Total Sediment of Residual Fuel |
ASTM D-4870 |
10 ml |
| Turbidity Reading |
HL-1190 |
25 ml |
| Vacuum Distillation |
ASTM D-1160 |
300 ml |
| Vapor Pressure Of Petroleum Products (RVP) |
ASTM D-323 |
25 ml |
| Vapor-Phase Rust Characteristics of Hydraul |
ASTM D-5534B |
300 ml |
| Viscosity at 100F and 210F in SUS |
ASTM D-445 |
10 ml |
| Viscosity at Temp. 50C, 25C |
ASTM D-445 |
10 ml |
| Viscosity at Special Temp. (Other) |
ASTM D-445 |
10 ml |
| Viscosity Calculations |
ASTM D-445 |
10 ml |
| Viscosity Index (Calculated) |
ASTM D-2270 |
50 ml |
| Viscosity Index w/ Tests |
ASTM D-2270 |
50 ml |
| Viscosity, Brookfield |
HL-1428 |
500 ml |
| Viscosity, Kinematic 40C, 100C, 100F, 210F |
ASTM D-445 |
10 ml |
| Viscosity, Kinematic to SUS Conversion |
ASTM D-2161 |
Calc |
| Water & Sediment by Centrifuge |
ASTM D-2709 |
100 ml |
| Water and Particulates in Dist. Fuels |
ASTM D-4176 |
900 ml |
| Water and Sediment |
ASTM D-4007 |
150 ml |
| Water by Distillation |
ASTM D-4006 |
200 ml |
| Water by Karl Fischer (Insulating Oils) |
ASTM D-1533 |
25 ml |
| Water by Karl Fischer (Evaporated) |
ASTM D-1533 |
25 ml |
| Water by Karl Fischer (Volumetric) |
ASTM D1744 |
25 ml |
| Water in Coolant by Karl Fischer |
ASTM D-1123 |
15 ml |
| Water in Organic Liquids by KF Coulometric |
ASTM E-1064 |
25 ml |
| Water in Petrol. Prod. by Coul. Titration |
ASTM D-6304 |
25 ml |
| Water in Petroleum Prod. And Bituminous Mat |
ASTM D-95 |
50 ml |
| Water in Refrigerants by Karl Fischer C. T. |
ARI-700 P2 |
1 lb |
| Water Leachables Extraction Procedure |
HL-0871 |
50 g |
| Water Separability of Oils |
ASTM D-1401 |
40 ml |
| Water Washout of Grease |
ASTM D-1264 |
100 g |
| Wear by Pin-On-Disc |
ASTM G-99 |
200 ml |
