| Analysis |
Method |
Volume |
Acidity in Refrigerants by Tritration |
ARI-700 P1 |
1 lb |
Water in Refrigerants by Karl Fischer C. T. |
ARI-700 P2 |
1 lb |
High Boiling Residue&Particulates Refrig. |
ARI-700 P3 |
1 lb |
Chloride in Refrigerants/Silver Chloride Pr |
ARI-700 P4 |
1 lb |
Purity of Refrigerants by GC |
ARI-700 P6 |
1 lb |
Contamination by Particle Count |
ARP 598A |
200 ml |
Flash Point by Tag Closed Cup |
ASTM D56 |
50 ml |
Distillation of Petroleum Products |
ASTM D86 |
100 ml |
Precipitation Number of Lube Oils |
ASTM D91 |
40 ml |
Flash & Fire Point by Cleveland Open Cup |
ASTM D92 |
75 ml |
Flash or Fire Point by Cleveland Open Cup |
ASTM D92 |
75 ml |
Flash Point Pensky Martin Closed Tester |
ASTM D93 |
75 ml |
Saponification No. of Petroleum Products |
ASTM D94 |
25 ml |
Water in Petroleum Prod. And Bituminous Mat |
ASTM D95 |
50 ml |
Pour Point |
ASTM D97 |
100 ml |
Wear by Pin-On-Disc |
ASTM G99 |
200 ml |
Copper Corrosion by Copper Strip |
ASTM D130 |
30 ml |
Color (Saybolt) |
ASTM D156 |
75 ml |
Conradson Carbon Residue on 10% Bottoms |
ASTM D189 |
50 ml |
Conradson Carbon Residue |
ASTM D189 |
50 ml |
Cone Penetration Full Scale (Unworked) |
ASTM D217 |
1 lb |
Cone Penetration, Full Scale Worked |
ASTM D217 |
1 lb |
NLGI Number, Calculation |
ASTM D217 |
1 lb |
Penetration 10,000 Strokes |
ASTM D217 |
1 lb |
Penetration 100,000 Strokes |
ASTM D217 |
1 lb |
Heat of Combustion by Bomb |
ASTM D240 |
10 ml |
API Gravity (Hydrometer Method) |
ASTM D287 |
200 ml |
Reid Vapor Pressure (Other than 100F) |
ASTM D323 |
25 ml |
Vapor Pressure Of Petroleum Products (RVP) |
ASTM D323 |
25 ml |
Existent Gum by Evaporation |
ASTM D381 |
100 ml |
Viscosity at 100F and 210F in SUS |
ASTM D445 |
10 ml |
Viscosity at Special Temp. (Other) |
ASTM D445 |
10 ml |
Viscosity at Temp. 50C, 25C |
ASTM D445 |
10 ml |
Viscosity Calculations |
ASTM D445 |
10 ml |
Viscosity, Kinematic 40C, 100C, 100F, 210F |
ASTM D445 |
10 ml |
Ash Content |
ASTM D482 |
100 ml |
Chloride Ion in Water |
ASTM D512 |
50 ml |
Ramsbottom Carbon Residue |
ASTM D524 |
10 ml |
Ramsbotton Carbon Residue 10% Bottoms |
ASTM D524 |
10 ml |
Aniline Point |
ASTM D611 |
10 ml |
Initial pH (Mod) |
ASTM D664 |
50 ml |
Total Acid Number, ASTM D664 |
ASTM D664 |
50 ml |
Rust Preventative Characteristics 24 hrs. |
ASTM D665 |
300 ml |
Rust Preventative Characteristics 48 hrs. |
ASTM D665 |
300 ml |
Oil Content in Petroleum Waxes |
ASTM D721 |
25 ml |
Sample Preparation by Bomb |
ASTM D808 |
10 ml |
Sulfated Ash of Lube Oils |
ASTM D874 |
100 ml |
Dielectric Strength of Insulating Oils |
ASTM D877 |
300 ml |
Foaming Characteristics |
ASTM D892 |
500 ml |
Pentane/Coagulated Insolubles |
ASTM D893 |
15 ml |
Toluene/Coagulated Insolubles |
ASTM D893 |
15 ml |
Penetration of Petrolatum |
ASTM D937 |
4 lbs |
Oxidation Stability of Grease |
ASTM D942 |
100 g |
TOST Oxidation Characteristics Of Inhibited Mine |
ASTM D943 |
500 ml |
Acid Number by Color Indicator |
ASTM D974 |
50 ml |
D975 No. 2 Diesel w/D976 Cetane (Pkg) |
ASTM D975 |
1 gal |
Cetane Index (Calculation Only) |
ASTM D976 |
100 ml |
Cetane Index (Includes tests) |
ASTM D976 |
100 ml |
Microscopical Sizing/Count on Filters |
ASTM F312 |
100 ml |
Ash Content of Engine Coolant and Antirusts |
ASTM D1119 |
50 ml |
Reserve Alkalinity of Engine Coolants |
ASTM D1121 |
20 ml |
Water in Coolant by Karl Fischer |
ASTM D1123 |
15 ml |
Vacuum Distillation |
ASTM D1160 |
300 ml |
Refractive Index |
ASTM D1218 |
10 ml |
Water Washout of Grease |
ASTM D1264 |
100 g |
pH of Engine Coolant |
ASTM D1287 |
100 ml |
Density, Relative Density (Specific Gravity |
ASTM D1298 |
200 ml |
Water Separability of Oils |
ASTM D1401 |
40 ml |
Cone Penetration (1/4) Unworked |
ASTM D1403 |
60 g |
Cone Penetration (1/4) Worked |
ASTM D1403 |
60 g |
Deleterious Particles in Grease |
ASTM D1404 |
5 g |
Color ASTM |
ASTM D1500 |
45 ml |
Water by Karl Fischer (Evaporated) |
ASTM D1533 |
25 ml |
Water by Karl Fischer (Insulating Oils) |
ASTM D1533 |
25 ml |
Active Sulfur |
ASTM D1662 |
100 ml |
Oil Separation from Greases |
ASTM D1742 |
125 g |
Corrosion Properties of Grease |
ASTM D1743 |
500 g |
Water by Karl Fischer (Volumetric) |
ASTM D1744 |
25 ml |
Sediment & Water in Fuel by Centrifuge |
ASTM D1796 |
100 ml |
Viscosity, Kinematic to SUS Conversion |
ASTM D2161 |
Calc |
Dropping Point |
ASTM D2265 |
5 g |
Viscosity Index (Calculated) |
ASTM D2270 |
50 ml |
Viscosity Index w/ Tests |
ASTM D2270 |
50 ml |
Oxidation Stability (RPVOT) |
ASTM D2272 |
100 ml |
Oxidation Stability Fuel Oil |
ASTM D2274 |
500 ml |
Particulates Contamination in Av. Fuel |
ASTM D2276 |
1000 ml |
Std Classification of Ind.Lubricants Calc |
ASTM D2422 |
Calc |
Cloud Point |
ASTM D2500 |
75 ml |
Water & Sediment by Centrifuge |
ASTM D2709 |
100 ml |
Compatibility of Fuel Oil by Spot test |
ASTM D2781 |
20 ml |
Base Number (Potentiometric) |
ASTM D2896 |
10 ml |
Glycol in Petroleum |
ASTM D2982 |
20 ml |
Sulfur by Micro. (Mod)(solids, grease,etc.) |
ASTM D3120 |
100 ml |
Sulfur by Microcoul. (light liquid petrol.) |
ASTM D3120 |
100 ml |
Freezing Point and Glycol Concentration |
ASTM D3321 |
50 ml |
Acid No. by SMC |
ASTM D3339 |
100 ml |
Fuel Dilution in Oils by GC |
ASTM D3524 |
5 ml |
Water by Distillation |
ASTM D4006 |
200 ml |
Water and Sediment |
ASTM D4007 |
150 ml |
Density by Digital Density Meter |
ASTM D4052 |
5 ml |
Water and Particulates in Dist. Fuels |
ASTM D4176 |
900 ml |
Sulfur By X-Ray Fluorescence |
ASTM D4294 |
10 ml |
Anions in Water by I.C. |
ASTM D4327 |
100 ml |
Sulfide Ion in Water |
ASTM D4658 |
50 ml |
Cetane Index w/ Distillation & API |
ASTM D4737 |
200 ml |
Cetane Index (Calculated) |
ASTM D4737 |
200 ml |
Base Number by Potentiometric Titration |
ASTM D4739 |
25 ml |
Sediment in Crude by Membrane Filtration |
ASTM D4807 |
15 ml |
Total Sediment of Residual Fuel |
ASTM D4870 |
10 ml |
Additives in Oils by ICP |
ASTM D4951 |
15 ml |
Density in Crude by Digital Densiometer |
ASTM D5002 |
5 ml |
Metals and Contaminants by ICP |
ASTM D5185 |
15 ml |
Apparent Vis. Of Eng. Oils Between -5C & |
ASTM D5293 |
20 ml |
Particulate Contamination in Av. Fuel |
ASTM D5452 |
500 ml |
Vapor-Phase Rust Characteristics of Hydraul |
ASTM D5534B |
300 ml |
| High Frequency Reciprocating Test Rig ( Fuel Lubricity) |
ASTM D-6079 |
10 ml |
Particulate Cont. in Middle Dist. Fuels |
ASTM D6217 |
1000 ml |
Water in Petrol. Prod. by Coul. Titration |
ASTM D6304 |
25 ml |
Water in Organic Liquids by KF Coulometric |
ASTM E1064 |
25 ml |
Accelerated Fuel Oil Stability |
DUPONT F21 |
50 ml |
Contamination by Filtration |
EMD 102 |
1000 ml |
Salt in Crude by Extraction HACH Method |
HACH |
250 ml |
Contamination of Brake Fluid with Oil |
HL0015 |
50 ml |
Bleed & Evaporation of Grease |
HL0033 |
50 g |
Water Leachables Extraction Procedure |
HL0871 |
50 g |
Particle Contamination by Filter Residue |
HL1116 |
100 ml |
Asphaltenes in Heavy Fuel Oil |
HL1120 |
10 ml |
Appearance |
HL1121 |
100 ml |
Sugar Test |
HL1124 |
100 ml |
Microbial Growth |
HL1126 |
10 ml |
Total Abrasives (Inorganic Fines) |
HL1128 |
100 ml |
Lube Oil Compatibility |
HL1129 |
50 ml |
Direct Reading Ferrography |
HL1131 |
10 ml |
Analytical Ferrography |
HL1132 |
10 ml |
Analytical Ferrography W/DR |
HL1132 |
10 ml |
Chlorides in Lubricants |
HL1137 |
10 ml |
FTIR Nicolet Impact 410 "Integra" |
HL1140 |
10 ml |
FTIR "Omnic" with Intrepertation |
HL1141 |
10 ml |
FT-IR Nicolet Impact 410 "Omnic"(IR Scan) |
HL1141 |
10 ml |
Filter Patch Test |
HL1142 |
100 ml |
Color Scale Conversions (Calc) |
HL1144 |
Calc |
Appearance of Grease |
HL1145 |
5 g |
BTU per Barrel, Gross (Calculated) |
HL1146 |
200 ml |
BTU per Lb/Gal/Bbl w/ Sulfur & API |
HL1146 |
200 ml |
PCB Screen (A), PCB Level (B) |
HL1147 |
10 ml |
PCB Screen (A), PCB Level (B) |
HL1147 |
10 ml |
Bacteria Count by "Easycult Combi" |
HL1150 |
25 ml |
Halogen by Ion Chromotography |
HL1151 |
100 ml |
Total Halogens by Ion Chromotography |
HL1151 |
100 ml |
Conductivity (Av. Hydraulic Fl.) |
HL1152 |
25 ml |
Phosphate Esters by GC (Av. Hydr. Fl.) |
HL1154 |
25 ml |
Oxyrane Oxygen by Perchloric Acid |
HL1157 |
25 ml |
Metal by ICP, Aqueous (Per Element) |
HL1158 |
10 ml |
Metal by ICP, Organic (Per Element) |
HL1158 |
10 ml |
Metals by ICP AES Organic (24 Elements) |
HL1158 |
10 ml |
Metals by ICP, Aqueous (24 Elements) |
HL1158 |
10 ml |
HMB Biomass Culture Study |
HL1161 |
25 ml |
Microwave Digestion (Preparation) |
HL1164 |
25 g |
Percent Soot by TGA, ASTM D5967 Appendix A4 |
HL1165 |
10 g |
Thermographic Analysis (TGA) |
HL1165 |
10 g |
Coolant (Anti-Freeze) Analysis |
HL1167 |
25 ml |
Chloride by Microcoulometry(solids,grs,wtr) |
HL1168 |
100 ml |
Chlorine by Microcoulometry (oil) |
HL1168 |
100 ml |
Antifreeze Conc. as Glycol |
HL1169 |
100 ml |
Evaporation of Diluent |
HL1173 |
100 ml |
Percent Moisture of Nonliquid |
HL1174 |
100 g |
Basic Nitrogen |
HL1175 |
50 g |
Particulate Contamination of Grease |
HL1178 |
5 g |
RULER Analysis |
HL1182 |
10 ml |
RFS- Rotating Filter Spectroscopy |
HL1183 |
10 ml |
HIAC Particle Count |
HL1184 |
100 ml |
Free Chlorides in Oil |
HL1186 |
50 ml |
Total Dissolved Solids in Coolant |
HL1187 |
50 ml |
Mineral Oil Content in EHC Fluid |
HL1189 |
500 ml |
Turbidity Reading |
HL1190 |
25 ml |
Ferrous Wear Debris by PQ Index |
HL1191 |
5 ml |
Nitrate by Ion Selective Electrode |
HL1192 |
50 ml |
Evaporation Residue |
HL1194 |
10 g |
Contamination by Thin Layer Chromatography |
HL1195 |
1 ml |
Micrcoscope Evaluation of Debris |
HL1196 |
25 ml |
SIMDIS (Simulated Distillation Process) |
HL1197 |
25 ml |
Viscosity, Brookfield |
HL1428 |
500 ml |
Basic Nitrogen by Titration |
UOP269 |
50 g |