Analysis |
Method |
Volume |
| Acid No. by SMC |
ASTM D-3339 |
100 ml |
| Acid Number by Color Indicator |
ASTM D-974 |
50 ml |
| Active Sulfur |
ASTM D-1662 |
100 ml |
| Additives in Oils by ICP |
ASTM D-4951 |
15 ml |
| Analytical Ferrography |
HL-1132 |
10 ml |
| Analytical Ferrography W/DR |
HL-1132 |
10 ml |
| Aniline Point |
ASTM D-611 |
10 ml |
| Antioxidant in HL Turb. Oil by RULER |
ASTM D-6810 |
5 ml |
| Antioxidant in Non-Zn Turb.Oil by RULER |
ASTM D-6971 |
5 ml |
| API Gravity (Hydrometer Method) |
ASTM D-287 |
200 ml |
| Apparent Vis. Of Eng. Oils Between -5C & |
ASTM D-5293 |
20 ml |
| Appearance of Oil |
HL-1121 |
100 ml |
| Ash Content |
ASTM D-482 |
100 ml |
| Bacteria Count by "Easycult Combi" |
HL-1150 |
25 ml |
| Base Number (Potentiometric) |
ASTM D-2896 |
10 ml |
| Base Number by Potentiometric Titration |
ASTM D-4739 |
25 ml |
| Chlorides in Lubricants |
HL-1137 |
10 ml |
| Chlorine by Microcoulometry (oil) |
HL-1168 |
100 ml |
| Chlorine in Petroleum by IC/BOMB |
ASTM D-808 |
5 ml |
| Cloud Point |
ASTM D-2500 |
75 ml |
| Color (Saybolt) |
ASTM D-156 |
75 ml |
| Color ASTM |
ASTM D-1500 |
45 ml |
| Color Scale Conversions (Calc) |
HL-1144 |
Calc |
| Conductivity (Av. Hydraulic Fl.) |
HL-1152 |
25 ml |
| Conductivity of Fluids |
HL-1152A |
25 ml |
| Conradson Carbon Residue |
ASTM D-189 |
50 ml |
| Conradson Carbon Residue on 10% Bottoms |
ASTM D-189 |
50 ml |
| Contamination by Particle Count |
ARP 598A |
200 ml |
| Copper Corrosion by Copper Strip |
ASTM D-130 |
30 ml |
| Density by Digital Density Meter |
ASTM D-4052 |
5 ml |
| Density Calculated from 60 F |
ASTM D-1298 |
200 ml |
| Density, Relative Density (Specific Gravity) |
ASTM D-1298 |
200 ml |
| Density/SG/API by Hydrometer, 1980 method |
ASTM D-1298 |
200 ml |
| Dielectric Strength of Insulating Oils |
ASTM D-877 |
300 ml |
| Diesel Fuel Dilution in Oils by GC |
ASTM D-3524 |
5 ml |
| Direct Reading Ferrography |
HL-1131 |
10 ml |
| Extreme Pressure Properties Fluid Lubricants |
ASTM D-3233 |
250 ml |
| Filter Patch Test |
HL-1142 |
100 ml |
| Filter Residue Properties Fluid Lubricants |
HL-1116 |
100 ml |
| Filter Spectroscopy Wear Metals by Aqueous |
ASTM D-1976 |
10 ml |
| Flash & Fire Point by Cleveland Open Cup |
ASTM D-92 |
75 ml |
| Flash or Fire Point by Cleveland Open Cup |
ASTM D-92 |
75 ml |
| Flash Point Pensky Martin Closed Tester |
ASTM D-93 |
75 ml |
| Flash Point by Setaflash Closed Cup |
ASTM D-3828 |
10 ml |
| Foaming Characteristics |
ASTM D-892 |
500 ml |
| FTIR "Omnic" with Interpretation |
HL-1141 |
10 ml |
| FTIR Nicolet Impact 410 "Integra" |
HL-1140 |
10 ml |
| FT-IR Nicolet Impact 410 "Omnic"(IR Scan) |
HL-1141 |
10 ml |
| Fuel Dilution in Oils by GC |
ASTM D-3524 |
5 ml |
| Gasoline Diluent in Engine Oil by GC |
ASTM D-3525 |
10 ml |
| Gasoline Dilution in Oil by Distillation |
ASTM D-322 |
100 ml |
| Glycol in Petroleum |
ASTM D-2982 |
20 ml |
| Halogen by Ion Chromatography |
HL-1151 |
100 ml |
| Heat of Combustion by Bomb |
ASTM D-240 |
10 ml |
| High Temperature Foam |
ASTM D-6082 |
1 ml |
| HIAC Particle Count |
HL-1184 |
100 ml |
| HMB Biomass Culture Study |
HL-1161 |
25 ml |
| Initial pH (Mod) |
ASTM D-664 |
50 ml |
| Interfacial Tension |
ASTM D-971 |
50 ml |
| Kinematic Viscosity of Transparent/Opaque
Liquids |
ASTM D-445 |
20 ml |
| Lube Oil Compatibility |
HL-1129 |
50 ml |
| Metal by ICP, Aqueous (Per Element) |
HL-1158 |
10 ml |
| Metal by ICP, Organic (Per Element) |
HL-1158 |
10 ml |
| Metals and Contaminants by ICP |
ASTM D-5185 |
15 ml |
| Metals by ICP AES Organic (24 Elements) |
HL-1158 |
10 ml |
| Metals by ICP, Aqueous (24 Elements) |
HL-1158 |
10 ml |
| Microbial Growth |
HL-1126 |
10 ml |
| Microscopic Evaluation of Debris |
HL-1101 |
Varies |
| Microscopical Sizing/Count on Filters |
ASTM F-312 |
100 ml |
| Microwave Digestion (Preparation) |
HL-1164 |
5 g |
| Noack Volatility |
ASTM D-5800 |
150 ml |
| Oxid. Stability of Insul. Oil by RBOT(mod) |
ASTM D-2112 |
100ml |
| TOST Oxidation Characteristics Of Inhibited Mine |
ASTM D-943 |
500 ml |
| Oxidation Stability (RPVOT) |
ASTM D-2272 |
100 ml |
| Oxidation Induction Time of Oils by PDSC |
ASTM D-6186 |
10 ml |
| Particle Count by HIAC |
HL-1184 |
100 ml |
| Particle Contamination by Filter Residue |
HL-1116 |
100 ml |
| PCB Screen (A), PCB Level (B) |
HL-1147 |
10 ml |
| Pentane Insolubles by Membrane Filtration |
ASTM D-4055 |
10 ml |
| Pentane/Coagulated Insolubles |
ASTM D-893 |
15 ml |
| Percent Soot by TGA, ASTM D-5967 Appendix A4 |
HL-1165 |
10 g |
| Pin-on-Disk |
ASTM G-99 |
250 ml |
| Pin-Vee Thin Film Drain and Dry mode |
ASTM D-5620 |
250 ml |
| Pour Point |
ASTM D-97 |
100 ml |
| Precipitation Number of Lube Oils |
ASTM D-91 |
40 ml |
| Ramsbottom Carbon Residue |
ASTM D-524 |
10 ml |
| Ramsbottom Carbon Residue 10% Bottoms |
ASTM D-524 |
10 ml |
| Refractive Index |
ASTM D-1218 |
10 ml |
| Research Octane Number |
ASTM D-2699 |
250 ml |
| RFS- Rotating Filter Spectroscopy |
HL 1183 |
10 ml |
| RULER Analysis |
HL-1182 |
10 ml |
| Rust Preventative Characteristics 24 hrs. |
ASTM D-665 |
300 ml |
| Rust Preventative Characteristics 48 hrs. |
ASTM D-665 |
300 ml |
| Sample Preparation by Bomb |
ASTM D-808 |
10 ml |
| Saponification No. of Petroleum Products |
ASTM D-94 |
25 ml |
| Sediment & Water in Fuel by Centrifuge |
ASTM D-1796 |
100 ml |
| Sludging and Corrosion Tendencies in Oils |
ASTM D-4310 |
300 ml |
| Soot Analysis by TGA |
ASTM D-5967 |
10 ml |
| Std Classification of Ind.Lubricants Calc |
ASTM 2422-86 |
Calc |
| Sugar Test |
HL-1124 |
100 ml |
| Sulfated Ash of Lube Oils |
ASTM D-874 |
100 ml |
| Sulfur by Micro. (Mod)(solids, grease,etc.) |
ASTM D-3120 |
100 ml |
| Sulfur by Microcoul. (light liquid petrol.) |
ASTM D-3120 |
100 ml |
| Sulfur by X-Ray |
ASTM D-2622 |
10 ml |
| Sulfur By X-Ray Fluorescence |
ASTM D-4294 |
10 ml |
| Thermal Stability of Hydraulic Oils |
ASTM D-2070 |
200 ml |
| Thermographic Analysis (TGA) |
HL-1165 |
10 g |
| Toluene/Coagulated Insolubles |
ASTM D-893 |
15 ml |
| TOST Oxidation Characteristics Turbine Oil |
ASTM D-943 |
500 ml |
| Total Acid Number |
ASTM D-664 |
50 ml |
| Total Halogens by Ion Chromatography |
HL-1151 |
100 ml |
| Viscosity at 100F and 210F in SUS |
ASTM D-445 |
10 ml |
| Viscosity at Temp. 50C, 25C |
ASTM D-445 |
10 ml |
| Viscosity at Special Temp. (Other) |
ASTM D-445 |
10 ml |
| Viscosity Calculations |
ASTM D-445 |
10 ml |
| Viscosity Index (Calculated) |
ASTM D-2270 |
50 ml |
| Viscosity Index w/ Tests |
ASTM D-2270 |
50 ml |
| Viscosity, Brookfield |
HL-1428 |
500 ml |
| Viscosity, Kinematic 40C, 100C, 100F, 210F |
ASTM D-445 |
10 ml |
| Viscosity, Kinematic to SUS Conversion |
ASTM D-2161 |
Calc |
| Water & Sediment by Centrifuge |
ASTM D-2709 |
100 ml |
| Water by Karl Fischer (Crude) |
ASTM D-4928 |
10 ml |
| Water by Karl Fischer (Evaporated) |
ASTM D-1533 |
25 ml |
| Water in Petroleum Prod. And Bituminous Mat |
ASTM D-95 |
50 ml |
| Water Separability of Oils |
ASTM D-1401 |
40 ml |
| Wear by Pin-On-Disc |
ASTM G-99 |
200 ml |
