Analysis |
Method |
Volume |
| Analytical Ferrography |
HL-1132 |
10 ml |
| Analytical Ferrography W/DR |
HL-1132 |
10 ml |
| Appearance of Grease |
HL-1145 |
5 g |
| Appearance of Oil |
HL-1121 |
100 ml |
| Ash Content |
ASTM D-482 |
100 ml |
| Bleed & Evaporation of Grease |
HL-0033 |
50 g |
| Chlorine in Petroleum by IC/ Bomb |
ASTM D-808 |
5 ml |
| Chloride by Microcoulometry (solids,grs,wtr) |
HL-1168 |
100 ml |
| Cold Filter Plugging Point |
ASTM D-6371 |
100 ml |
| Cone Penetration (1/4) Unworked |
ASTM D-1403 |
60 g |
| Cone Penetration (1/4) Worked |
ASTM D-1403 |
60 g |
| Cone Penetration Full Scale (Unworked) |
ASTM D-217 |
1 lb |
| Cone Penetration, Full Scale Worked |
ASTM D-217 |
1 lb |
| Copper Corrosion of Lubricating Grease |
ASTM D-4048 |
100 ml |
| Corrosion Properties of Grease |
ASTM D-1743 |
500 g |
| Dropping Point |
ASTM D-2265 |
5 g |
| Estimation of Deleterious Particles in Grease |
ASTM D-1404 |
25 ml |
| Evaporation of Diluent |
HL-1173 |
100 ml |
| Four Ball Wear for Greases |
ASTM D-2266 |
125 ml |
| FTIR "Omnic" with Interpretation |
HL-1141 |
10 ml |
| FT-IR Nicolet Impact 410 "Omnic"(IR Scan) |
HL-1141 |
10 ml |
| Metals by ICP AES Organic (24 Elements) |
HL-1158 |
10 ml |
| Metals by ICP, Aqueous (24 Elements) |
HL-1158 |
10 ml |
| Microwave Digestion (Preparation) |
HL-1164 |
25 g |
| NLGI Number, Calculation |
ASTM D-217 |
1 lb |
| Oil Separation from Greases |
ASTM D-1742 |
125 g |
| Oxidation Stability of Grease |
ASTM D-942 |
100 g |
| Particulate Contamination of Grease |
HL-1178 |
5 g |
| Pin-on-Disk |
ASTM G-99 |
250 ml |
| Penetration 10,000 Strokes |
ASTM D-217 |
1 lb |
| Penetration 100,000 Strokes |
ASTM D-217 |
1 lb |
| RULER Analysis |
HL-1182 |
10 ml |
| Sample Preparation by Bomb |
ASTM D-808 |
10 ml |
| Sulfur by Micro. (Mod)(solids, grease,etc.) |
ASTM D-3120 |
100 ml |
| Thermographic Analysis (TGA) |
HL-1165 |
10 g |
| Total Halogens by Ion Chromotography |
HL-1151 |
100 ml |
| Water by Karl Fischer (Evaporated) |
ASTM D-1533 |
25 ml |
| Water Washout of Grease |
ASTM D-1264 |
100 g |
